DISPOSABLE COVERALLS
Full Length Body Suits
Why Disposable Coveralls Over the Other Re-Usable Type
Disposable coveralls and separate shoe covers may be used, if appropriate, to avoid the need for laundering. Non-disposable coveralls must be replaced daily if exposure levels exceed 200 µg/m³, and weekly for exposure levels from 50 to 200 µg/m³. If an employee leaves the work area wearing protective clothing, the clothing should be cleaned with HEPA filter vacuum equipment to remove loose particle contamination; or as an alternative, the coveralls should be removed. Before respirators are removed, HEPA vacuuming or another suitable method, such as damp wiping, shall be used to remove loose particle contamination on the respirator and at the face-mask seal. Use work garments of appropriate size, and use duct tape to reinforce their seams (e.g., underarm, crotch, and back).
Coverall Types
- Premium
- Breathable Barrier
- Standard 3 Layer
- Spunbound SMS
- Economy Duster
- Polypropylene
© Helthkare Products LLC. The New Definition Of Superior Quality and Service.
Any retransmission, reproduction, distribution, downloading, storage or display of this material
in electronic or any other form without the written consent of Helthkare is prohibited.
Made from Micro porous Breathable Film Fabrics, allowing air to go through, but not liquid, impervious yet breathable
|
Excellent protection against non-hazardous chemical splashes, liquids, dry particles, grease & grime, lint free
|
PassSynthetic Blood Penetration & Viral Penetration Test per ASTM F1671
|
Breathable, high moisture vapor transmission rate, anti-static treated.
|
Available with Hood & Booties and, Elastic Cuffs & Ankles
|
Zipper Front, White
|
These garments may be used in environments as a barrier against certain chemical splash and spray applications, lead paint and asbestos removal projects, general utility work, agricultural areas and paint booth applications.
Our SMS garments are made of a three-layer, spunbond/meltblown/spunbond material. This material offers some splash resistance while keeping the worker cool and comfortable. SMS provides a fluid and particulate barrier to protect the worker without sacrificing mobility and comfort.
PREMIUM - BREATHABLE BARRIER
Heavy Duty 1-½ oz. "SMS" fabrics
|
Anti-static treated, no clinging
|
Fluid resistant, durable, breathable
|
Available with Hood & Booties and, Elastic Cuffs & Ankles
|
Zipper Front, White
|
STANDARD - SPUNBOUND SMS
Light weight .09 oz. "SPP" fabrics
|
Available with Hood & Booties and, Elastic Cuffs & Ankles
|
Zipper Front, White
|
ECONOMY - POLOPROPYLENE
Polypropylene is a lightwieght, breathable fabric that provides economical protection for various work environments applications. Polypropylene is appropriate for wear in the non-hazardous workplace and is a low cost solution for protecting workers against non-hazardous dry particulates, dirt and grime. These environments include, industrial facilities, pharmaceuticals, food processing, construction sites and certain environmental cleanup sites.
DISPOSABLE COVERALLS vs RE-USABLES
